Low-Power and Area-Efficient N-Bit Carry-Select Adder
Abstract
Design of High Efficiency Carry Select Adder Using SQRT Technique presents many opportunities for increasing the speed and reducing the area of any data processor. Only Carry Select Adder (CSLA) is the fastest adders which are used in many data-processing processors to perform fast arithmetic operation. From the structure of the CSLA, it is clear that there is scope for reducing the area and delay in the CSLA. In this thesis, we have implemented a carry select adder for the computational process, these modules are programmed in VHDL Carry Select Adder (CSLA) is the fastest adder in all other adder. This work uses very simple and efficient gate-level modification to reduce the area and delay of the CSLA. Based on this modification 8-, 16-, 32-bit square-root CSLA (SQRT CSLA) architecture has been developed and it is compared with the regular SQRT CSLA architecture. The proposed design has reduced area and delay as compared with the regular SQRT CSLA with only a slight reducing the delay. This work evaluates the performance of the proposed designs in parameters that is delay, area, and their products with logical effort. The results analysis shows that the proposed CSLA structure is better than the regular SQRT CSLA.
Keywords: Carry Save Adder, Carry Select Adder, Ripple Carry Adder, Binary to Excess-1 Converter, Square root CSA, VHDL
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |