Ultra-Wideband Monopole Microstrip Filtenna with Hairpin Structure for Wireless Application

Authors

  • Mohammad Hassan Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh
  • Rajan Mishra Department of Electronics and Communication Engineering, Madan Mohan Malaviya University of Technology, Gorakhpur, Uttar Pradesh

Keywords:

Microstrip Filtenna, Hairpin Structure, WiMax and WLAN, Bandpass Filter

Abstract

Microstrip filtenna for WiMax/LTE and WLAN band has been proposed and presented. This paper presents design of bandpass filter having hairpin structure which is incorporated into the feedline. The FR4 substrate is used for the proposed antenna. The proposed filtenna has been designed and investigated using HFSS simulator. The proposed filtenna operates at 3.2 GHz. From the simulation results, it is extracted that passband of hairpin filter structure is from 2.7–5.6 GHz. Passband of proposed filtenna having range 2.8–5.6 GHz is achieved. The proposed design shows peak return loss of -28.5943 dB at 3.2 GHz and -16 dB at 4.8 GHz. The proposed filtenna with reduced size and enhanced performance is designed.

Cite this Article

Mohammad Hassan, Rajan Mishra. Ultra-Wideband Monopole Microstrip Filtenna with Hairpin Structure for Wireless Application. Research & Reviews: A Journal of Embedded System & Applications. 2019; 7(1): 25–29p.


Downloads

Published

2019-06-13

Issue

Vol. 7 No. 1 (2019)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.