Novel Effect of Gate Length on the Electrical Characteristics of Nanoelectronic Double-Heterojunction HEMTs with the Circuit Symbols and Load Line to Configure the Common-Source Amplifiers in Analog Electronics

Authors

  • Subhadeep Mukhopadhyay
  • Sanjib Kalita Department of Electronics and Computer Engineering, National Institute of Technology Arunachal Pradesh, Yupia, District-Papum Pare, Arunachal Pradesh, India

Keywords:

Nanoelectronic, double heterojunction, drain current, drain voltage, gate voltage, gate length, quantum well, circuit symbol, amplifier, analog electronics

Abstract

Total 3566 individual simulation-outputs are reported in this work. The linear region and saturation region in each drain characteristic curve of nanoelectronic AlGaN/GaN/AlGaN double-heterojunction high electron mobility transistors (HEMTs) are clearly shown. In this work, we have obtained the maximum drain current of 389 mA using these HEMTs. The investigations on the dependence of drain current with respect to gate length in these double-heterojunction HEMTs is a novelty of this work. The conduction band engineering in these double-heterojunction HEMTs are investigated in detail as another novelty of this work. Also, the circuit symbols of the single-heterojunction HEMTs and double-heterojunction HEMTs are proposed as another novelty of this work. The electrical performance of the common-source amplifier using these double-heterojunction HEMTs is graphically and approximately presented as another novelty of this work. The set of simulation studies in this work will be helpful to experimentally fabricate the common-source amplifiers using the nanoelectronic HEMTs in analog electronics.

Cite this Article. Subhadeep Mukhopadhyay, Sanjib Kalita. Novel Effect of Gate Length on the Electrical Characteristics of Nanoelectronic Double-Heterojunction HEMTs with the Circuit Symbols and Load Line to Configure the Common-Source Amplifiers in Analog Electronics. Research & Reviews: A Journal of Embedded System & Applications. 2017; 5(2): 8–18p.

Published

2017-09-01

Issue

Vol. 5 No. 2 (2017)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.