Performance and Degradation Analysis of PolyCrystalline PV Modules Installed in Tropical Conditions
Keywords:
Open-circuit voltage, short-circuit current, maximum output voltage, maximum power output, fill factor, efficiency, degradation rateAbstract
In this paper, practical field performance of poly-crystalline solar photovoltaic (PV) modules, which were installed at rooftop of the department of electrical engineering BVRIT, has been studied and the correlation between efficiency, temperature and degradation rate of modules as per STC conditions has been presented. The nominal output power of the PV module considered for the study is 240 Wp and the panel is compressed of 60 cells in a 10×6 matrix connected in series. After few operation years under tropical environment, the degradation rate of electrical characteristics such as I-V and P-V curves, open-circuit voltage (Voc), shortcircuit current (Isc), maximum output current (Imax), maximum output voltage (Vmax), maximum power output (Pmax) and fill factor (FF) are evaluated at standard test conditions (STC). Through this study, it has been noticed that the efficiency of solar panel is linearly inversely proportional to temperature and degradation rate in a linear fashion.
Cite this Article Greeshma P, Ramchander N. Performance and Degradation Analysis of Poly-Crystalline PV Modules Installed in Tropical Conditions. Research & Reviews: A Journal of Embedded System & Applications. 2016; 4(3): 5–10p.
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |