Co-planar Waveguide Circular Ring Microstrip Patch Antenna for WLAN Applications

Authors

  • Meenal Kate
  • Anjana Goen

Abstract

Abstract

A printed circular microstrip patch antenna with a four rectangular shape strip and co planar rectangular ground plane has been proposed. Four rectangles of dimensions 4.8mm x3mm are arranged in such a manner to achieve both the WLAN frequency band. The bandwidths of 341MHz and 414MHz are achieved having a resonant frequency of 2.37GHz and 5.45GHz respectively. This antenna is printed on the glass epoxy (FR4 lossy) of dielectric substrate with relative permittivity (€r) of 4.3, thickness of 1.6 mm. Other parameters such as directivity, antenna gain, radiation pattern are also analysed with different values of ground plane length. The proposed antenna simulation result is capable of operating over the 2.187–2.527 GHz frequency band and 5.234-5.643 GHz frequency band, which cover the 2.4/5.2GHz, WLAN operating bands.

Keywords: Circular ring microstrip patch antenna (CRMPA), microstrip patch antenna (MPA), multiband antenna, wireless local area network (WLAN) Antenna

Cite this Article

Meenal Kate, Anjana Goen. Co-planar waveguide circular ring microstrip patch antenna for WLAN applications. Journal of Communication Engineering & Systems. 2016; 6(3): 1–6p.


Downloads

Published

2019-04-03

Issue

Vol. 6 No. 3 (2016)

Section

Articles

License

Declaration and Copyright Transfer Form

(to be completed by authors)

I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.

  • I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
  • I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
  • I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
  •  I/We also agree to the authorship of the article in the following order:

Author’s name                                    

 

1. ________________

2. ________________

3. ________________

4. ________________

 

We  Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal.