PAPR Reduction using Selective Mapping Method for OFDM Communication Systems
Abstract
Abstract
Selective mapping method (SLM) is one of the most important techniques used for peak-to-average power ratio (PAPR) reduction of orthogonal frequency division multiplexing (OFDM) communication system. It is simple in implementation, gives distortionless transmission and reduces PAPR significantly. Mathematical modelling and Matlab simulation have been carried out to analyse its performances. At of CCDF, PAPR values for OFDM signal without applying any reduction technique is 11.5, 11.8, 12.1, 12.4 and 12.6 dB for 64, 128, 256, 512 and 1024 numbers of subcarriers respectively. When compared with OFDM signal, the reduction in PAPR value with SLM technique are 5.4, 4.4, 4.3, 4.1 and 3.9 dB with 64, 128, 256, 512 and 1024 number of subcarriers respectively for number of phase vectors equal to 16. There is reduction in the value of PAPR with decrease in number of sub carriers and increase in value of phase vectors. But this reduction in PAPR has been obtained at the cost of slight reduction in transmission data rate as side information has to be transmitted to the receiver having information about the phase vector which produces minimum PAPR value.
Keywords: Selective mapping method, OFDM, high power amplifier, peak-to-average power ratio, multi carrier communication
Downloads
Published
Issue
Section
License
Declaration and Copyright Transfer Form
(to be completed by authors)
I/ We, the undersigned author(s) of the submitted manuscript, hereby declare, that the above manuscript which is submitted for publication in the STM Journals(s), is not published already in part or whole (except in the form of abstract) in any journal or magazine for private or public circulation, and, is not under consideration of publication elsewhere.
- I/We will not withdraw the manuscript after 1 week of submission as I have read the Author Guidelines and will adhere to the guidelines.
- I/We Author(s ) have niether given nor will give this manuscript elsewhere for publishing after submitting in STM Journal(s).
- I/ We have read the original version of the manuscript and am/ are responsible for the thought contents embodied in it. The work dealt in the manuscript is my/ our own, and my/ our individual contribution to this work is significant enough to qualify for authorship.
- I/We also agree to the authorship of the article in the following order:
Author’s name
1. ________________
2. ________________
3. ________________
4. ________________
| We Author(s) tick this box and would request you to consider it as our signature as we agree to the terms of this Copyright Notice, which will apply to this submission if and when it is published by this journal. |